Buy on Amazon
1.
Position the slide switch to auto on/off
2.
Connect the sound bar to your TV via minijack
3.
Connect the sound bar to an AC outlet
4.
Turn on your TV and enjoy great sound!
Amplifier with inbuilt DSP functionality that enhances voice quality
2.0 stereo configuration with 2 set of 4" full tone woofers and 1" tweeter
Made by a team of expert audio engineers and industrial designers in our Danish HQ
Speaker front made from Kvadrat wool in Denmark. Cabinet made of wood fiber – the preferred material for high-performance audio
Speaker front is available in 5 colours. Speaker front is removable – find the colour that matches your interior
Installation guide, wall brackets and drilling template included in the box
"In our line of business, it is imperative that we can always present films, designs and visual concepts in the best possible quality. And that we can conduct meetings and presentations without having to deal with technological issues.” - Martin Søholm, Founding Partner and Sales Director of Creative Zoo.
Q: How is the Neets Sound Bar different from cheaper consumer soundbars that I see in my local electronics store?
A: Neets Sound Bar is designed for meeting room use. It packs a serious punch, but more importantly, it delivers super-accurate speech playback, so your online meetings will feel much more natural.
Q: Does Neets SB-1 work with any flat panel display?
A: Pretty much. But for the best experience, you should ensure that your flat panel display or TV has a 'variable level' analog or TOSLINK audio output.
Q: Where should I position the Neets Sound Bar?
A: Well, that is totally up to you. But we would suggest just below your flat panel display or TV on either a shelf or on the wall using the included wall brackets.
Get more information about the Neets Sound Bar on Neets' tech support portal
Enclosure Wood (MDF)
Enclosure finish Mate black vinyl
Front grille Textile covered MDF
Width 1018 mm / 40.1 inch
Depth 75 mm / 2.95 inch
Depth w. wall bracket 81mm / 3.18 inch
Height 130 mm / 5.1 inch
Weight 4.5 Kg
Audio output
Output power 4 x 20 Wrms
THD+N < 0.1 % @ 1 W
Woofer 2 x 4” dual magnet,
sandwich membrane
w/rubber surround
Tweeter 2 x 1” soft dome
Frequency Response 50 Hz - 20 kHz +/- 3 dB
Maximum SPL 106 dB SPL @ 1m
RS-232
Ports 1 x bidirectional
Baud rate 19200 bit/sec
Data bits 8
Parity None
Stop bits 1
Connector 1 x 3 pin screw block
Digital audio input
Interface standard IEC 60958
AC-3, DTS decoding Not supported
Bit depth 16/24 bit
Sample rate 32/44.1/48/96/192 kHz
Wake on signal Yes
Connector 1 TOSLINK female
On/Off
Auto On/Off Yes
Wake on signal Yes
Power input
Input voltage 24 VDC
Max power usage 50 W
Standby power usage < 0.5 W
Connector 5,5 mm DC plug
Power adaptor
Line voltage 100 VAC – 240 VAC
Line frequency 50 Hz – 60 Hz
Output voltage 24V
Max output current 2.5A
